MCMILLAN流量傳感器106系列
型號106
McMillan 106型FLO傳感器能夠測量極低的液體流速，從15 mL /分鐘到10 L /分鐘，滿刻度精度為±1.0％或更高！
可以測量各種各樣的流體。使用獲得專利的Pelton型微型渦輪機葉輪可獲得可重復的結果。自1988年以來，這種經過驗證的設計就一直提供精確的結果，并且在連續運行服務無故障的多年中贏得了應有的聲譽。
由于這些產品的緊湊尺寸和經濟成本，因此106型FLO傳感器適用于多種工業，商業，實驗室和OEM應用。一些示例應用包括對烴類流體，燃料，輕油，溶劑，冷卻劑，農藥，弱酸，堿和去離子水的測量。
提供幾種電源和輸出配置，包括脈沖和模擬輸出。NIST可追溯證書可用。
106型功能和選件
準確性/線性
模擬輸出模型的精度指標為滿量程的±1.0％（包括線性度）。脈沖輸出模型的精度指標為滿量程的±3.0％（包括線性度）。
校準
所有設備均在出廠時使用去離子水進行了校準。對于粘度不同于水的流體，可能需要校準曲線。
顯示
McMillan具有與FLO-SENSORS一起使用的廣泛的遠程顯示器。請在線查看顯示內容，或要求工廠提供更多信息。
電氣連接
所有單元均配有一條集成有PVC護套的電纜，并尾纖引線端接。這條4線電纜包括電源和信號連接。電纜長度在部件號中指定。
流量范圍
流量范圍從15-100 mL /分鐘到1-10 L /分鐘。有關定制要求，請咨詢工廠。
流體連接
所有單元都有標準的壓縮管配件。兼容Flaretek的外螺紋火炬接頭是可選的。配件使用1/8“ NPT端口安裝。出于組裝考慮，配件只能由工廠安裝和拆卸。非標準連接類型可能應要求提供。
MT安裝板
標準型號106單元從底部安裝。如圖所示，可選的MT安裝板允許從頂部安裝設備。
功率
可以指定設備以12 VDC或24 VDC電源運行。各種電源適配器可用于12 VDC版本。
信號輸出
可以將單元配置為脈沖輸出或模擬輸出。模擬輸出選擇包括4-20 mA，0-5 VDC和0-10 VDC。
TX外部涂層選項
標準的106型在外部具有暴露的鋁和不銹鋼部件。TX選件用PFA和聚對二甲苯涂層的組件替代了這些組件，以提供額外的防腐蝕元素保護。
超高壓應用
如果要測量高純度流體的流速，請考慮使用U707型或U708型。
濕材料
所有單元只有PTFE，全氟彈性體，藍寶石和PFA作為潤濕部件。
Model 106
McMillan Model 106 FLO-SENSORS are capable of measuring extremely low liquid flow rates from 15 mL/minute up to 10 L/minute with a full scale accuracy of ±1.0% or better!
A wide variety of fluids may be measured. Repeatable results are achieved using a patented Pelton-type microturbine wheel. This proven design has been providing precision results since 1988 and has developed a well-deserved reputation for continuous operational service for many years without failure.
Because of the compact size and economical cost of these products, the Model 106 FLO-SENSORS are suitable for a wide variety of industrial, commercial, laboratory and O.E.M. applications. Some sample applications include measurement of hydrocarbon fluids, fuels, light oils, solvents, coolant, pesticides, mild acids, alkalis, and deionized water.
Several power and output configurations are available,including both pulse and analog outputs. NIST Traceable certificates are available.
Model 106 Features & Options
ACCURACY/LINEARITY
Analog output models have an accuracy specification of ±1.0% full scale (including linearity). Pulse output models have an accuracy specification of ±3.0% full scale (including linearity).
CALIBRATION
All units are calibrated at the factory using deionized water. Calibration curves may be requested for fluids with viscosities differing from water.
DISPLAYS
McMillan has a comprehensive range of remote displays for use with FLO-SENSORS. Please review displays available online or request further information from the factory.
ELECTRICAL CONNECTIONS
All units have an integrated PVC-jacketed cable terminated with pigtail leads. This 4-wire cable includes both power and signal connections. Cable length is specified in the part number.
FLOW RANGES
Flow ranges from 15-100 mL/minute up to 1-10 L/minute are available. Consult the factory for custom requirements.
FLUID CONNECTIONS
All units have compression tube fittings standard. Flaretek-compatible male flare fittings are optional. Fittings are installed using 1/8″ NPT ports. Due to assembly considerations, fittings should only be installed and removed by the factory. Non-standard connection types may be available upon request.
MT MOUNTING PLATE
Standard Model 106 units mount from the bottom. The optional MT mounting plate allows the unit to be mounted from the top, as seen in the picture.
POWER
Units may be specified to operate with either 12 VDC or 24 VDC power. Various power adapters are available for use with 12 VDC versions.
SIGNAL OUTPUTS
Units may be configured for either pulse output or analog output. Analog output choices include 4-20 mA, 0-5 VDC, and 0-10 VDC.
TX EXTERIOR COATING OPTION
The standard Model 106 has exposed aluminum and stainless steel parts on the exterior. The TX option replaces those components with PFA and Parylene coated components for extra protection against corrosive elements.
UHP APPLICATIONS
If you wish to measure the flow rate of a high purity fluid, consider the Model U707 or Model U708 instead.
WETTED MATERIALS
All units have only PTFE, perfluoroelastomers, sapphire, and PFA as wetted parts.
MCMILLAN流量傳感器106系列其他常見系列：
MCMILLAN 106
MCMILLAN 106F
MCMILLAN IRIDIUM
MCMILLAN 101
MCMILLAN 102
MCMILLAN 104
MCMILLAN 107
MCMILLAN 108
MCMILLAN 400
MCMILLAN 470
MCMILLAN 501
MCMILLAN Liquid Flow Sensors NEW + ORIGINAL+ ONE YEAR WARRANTY
愛澤工業成立于2010年，定位于向先進制造工業提供高端制造技術和設備。代理經營世界先進的電氣自動化、機械與傳動、流體控制、儀器儀表、工具等產品。作為電氣，液壓以及氣動解決方案的合作伙伴，我們利用我們的全球協作團隊，為客戶提供先進解決方案，市場知識以及相關增值服務來幫助優化客戶的工作效率，提高可靠性和安全性，致力于成為工業產品和解決方案的優質渠道。
如果有任何關于MCMILLAN流量傳感器106系列的疑問，請隨時與我們溝通（021-31006702）。我們將盡全力解決您的問題。
If you have any question for MCMILLAN products, please feel free to dial 0086-21-3100 6702/ send request email to sales@ize-industries.com / browse our website:jjxdch.cn.
MCMILLAN流量傳感器106系列產品參數
