亚洲日韩精品无码一区二区三区,日韩精品无码一区二区三区久久久 ,国产高清乱理伦片中文,无码精品久久久天天影视

Enclosure

Diecast low copper aluminum alloy body and cover, with an epoxy powder finish. Meets the requirements of IEC IP65 and provides the environmental protection of NEMA Type 4.

Mounting

Valve yoke, surface, or nominal DN 50 or 2 in pipe.
Calibrated for vertical mounting unless otherwise
specified.

Approximate Mass

2.3 kg (5 lb)

Dimensions

Refer to “Dimensions – Nominal” on page 7, and to Dimension Print DP 018-430

Input/Output Connections

Electrical

Tapped for 1/2 inch conduit fitting to connect to a pair of 0.5 m (18 in) long 1.00 mm2 (18 AWG) twisted leads,

Pneumatic

1/4 NPT for air supply and output signal

Data Plate

Aluminum data label fastened to housing with pressure sensitive adhesive. Includes space for customer tag data up to a maximum of 86 characters and spaces. For additional space, see optional Customer Tag.

OPTIONAL FEATURES

Customer Tag

Stainless steel tag wired to converter for customer
tag data that doesn't fit on data plate. There can be a
maximum of 10 lines of data with 40 characters and
spaces per line. Specify AS Code MTS.

Split Range Input Signal

4 to 12, 12 to 20, 10 to 30, or 30 to 50 mA dc.
Selectable using Model Code and specifying split
range required.

Alternative Output Signal

Refer to Invensys Foxboro for other than standard
output signals.

Explosionproof Junction Box

Integrally mounted to converter. Specify Model Code Suffix -J.

PG11 Trumpet Type Cable Connection

For use with, and assembled to explosionproof (-J)
junction box specified above. Also available without
(-J) junction box for non-explosionproof applications.
Not offered with Electrical Certification
Specifications CS–E/CD–A and CS–E/FD–A.Specify AS Code PG–11.

Adjustable Filter Regulator

Provided without gauge. Specify Model Code Suffix -R.

Supply (Input) and Output Pressure Gauges

Must be selected per output range requirements.
Integrally mounted to converter. Specify Model Code
Suffix -S.

Miniature Junction Box

Enclosure size is approximately 64 x 58 x 33 mm
(2.5 x 2.3 x 1.3 in). Designed to meet the
requirements of IEC IP65 and provide the
environmental protection of NEMA Type 4. Provided
with 1/2 inch NPT conduit connection, 20 mm (M20)
threaded hole, or PG11 or PG13.5 trumpet type
cable connections. These connections are located
for either front or rear cable entry. This junction box
is not available for explosionproof applications.
Junction box with 1/2 inch conduit connection for
front entry is optional selection -M, and with 1/2 NPT
conduit connection for rear entry is optional
selection -P