ACOPIAN成立于1957年，主要做交流電源，直流電源，高壓電源。
ACOPIAN電源12EB120技術參數
Input Voltage Range: | 105 to 125 |
Nominal Output Voltage: | 12 |
Output Current Amps: | 1.2 |
Case Size: | EB-20 |
ACOPIAN電源產品特點
Although small in size, these mini-modules offer high performance at modest prices. All models, with series regulated outputs ranging from 1 to 75 volts and as high as 2.5 amps, may be mounted in an area only 3.5? x 2.5?. Dual output models are available with the ratings commonly required for driving op amps and other balanced loads. Terminal strip input/output connections eliminate all need for sockets or soldering. Short circuit protection, encapsulated construction, and conservative design assure long term reliability
STANDARD FEATURES
? May be used in series
? No derating or heat sinking required
? Short circuit protected
? Small, lightweight
SPECIFICATIONS
Input Voltage: 105-125 VAC, 47 to 420 Hz, single phase.
Output Voltage Setting: Outputs are factory preset to within ±2% (1 to 9 volt models) or ±1% (10 to 75 volt models) of the nominal output voltage.
T/C terminal: For single output models, the T/C terminal can be used to trim the output more precisely to the nominal voltage rating by connecting an external resistor from the T/C terminal to either the + or– terminal. For dual output models, the T/C terminal is the output common.
Polarity: Either positive or negative terminal of a single output module may be grounded. Dual output modules have a positive/common/negative output terminal configuration.
Ambient Operating Temperature: –20 to +71°C. No derating required.
Storage Temperature: –55 to +85°C.
Temperature Coefficient: From 9 to 75 volts, typically 0.015%/°C; 1 to 8 volts, 0.03%/°C.
Impedance: 0.07 ohms at 1 kHz and 0.2 ohms at 10 kHz (approx.).
Mounting: Threaded mounting holes permit mounting toa chassis, cabinet wall or bracket, or they may be used on a test bench or tabletop. When wall-mounting or DIN rail mounting is desired, use accessory Mounting Kits on page H4.
雖然尺寸小，但這些迷你模塊以適中的價格提供高性能。所有型號的串聯穩壓輸出范圍從 1 到75伏，最高可達2.5安，可以安裝在僅3.5? x 2.5?的區域內。雙輸出型號可提供驅動運算放大器和其他平衡負載通常所需的額定值。端子排輸入/輸出連接無需插座或焊接。短路保護、封裝結構和保守設計確保長期可靠性
標準功能
? 可串聯使用
? 無需降額或散熱
? 短路保護
? 體積小、重量輕
規格
輸入電壓：105-125 VAC，47 至 420 Hz，單相。
輸出電壓設置：輸出出廠預設為標稱輸出電壓的 ±2%（1 至 9 伏型號）或 ±1%（10 至 75 伏型號）。
T/C 端子：對于單輸出型號，通過將外部電阻器從 T/C 端子連接到 + 或 – 端子，T/C 端子可用于將輸出更精確地調整到額定電壓額定值。對于雙輸出型號，T/C 端子是輸出公共端。
極性：單個輸出模塊的正極或負極都可以接地。雙輸出模塊具有正/公共/負輸出端子配置。
環境工作溫度：–20 至 +71°C。無需降容。
存儲溫度：–55 至 +85°C。
溫度系數：從 9 到 75 伏，通常為 0.015%/°C； 1 到 8 伏，0.03%/°C。
阻抗：1 kHz 時為 0.07 歐姆，10 kHz 時為 0.2 歐姆（大約）。
安裝：螺紋安裝孔允許安裝到機箱、機柜壁或支架，或者它們可用于測試臺或桌面。如果需要壁掛式安裝或 DIN 導軌安裝，請使用第 H4 頁上的附件安裝套件。
ACOPIAN電源其他常用型號：
ACOPIAN 12EB20
ACOPIAN 12EB40
ACOPIAN 12EB70
ACOPIAN 12EB120
ACOPIAN 13EB20
ACOPIAN 13EB35
ACOPIAN 13EB60
ACOPIAN 13EB100
ACOPIAN power supply NEW + ORIGINAL+ ONE YEAR WARRANTY
愛澤工業成立于2010年，定位于向先進制造工業提供高端制造技術和設備。代理經營世界先進的電氣自動化、機械與傳動、流體控制、儀器儀表、工具等產品。作為電氣，液壓以及氣動解決方案的合作伙伴，我們利用我們的全球協作團隊，為客戶提供先進解決方案，市場知識以及相關增值服務來幫助優化客戶的工作效率，提高可靠性和安全性，致力于成為工業產品和解決方案的優質渠道。
如果有任何關于ACOPIAN電源12EB120的疑問，請隨時與我們溝通（021-31006702）。我們將盡全力解決您的問題。
If you have any question for ACOPIAN products, please feel free to dial 0086-21-3100 6702/ send request email to sales@ize-industries.com / browse our website: jjxdch.cn.
ACOPIAN電源12EB120介紹及技術參數
