KONZEPT Energietechnik GmbH是一家專業生產和制造安全充電器的企業,公司為世界范圍內的客戶提供安全的充電器和設備。除了為正常是市場需求提供標準單元的產品組合外,KONZEPT的應用程序還為客戶提供定制的UPS系統,確保了客戶服務的比例。
KONZEPT的穩壓器可確保機器在惡劣的條件環境下運行,根據其輸出大小和應用選擇磁性、自動或電子功能。
KONZEPT的主要產品有DC-UPS系列充電器模塊,AC UPS系列充電器模塊,KONZEPT直流充電器,KONZEPT交流充電器等等。
KONZEPT模塊BEK2420-3技術參數
Technical data | BEK 2420-3 |
Input | |
Nominal input voltage | 400 - 500 Vac |
Input voltage range | 320 - 575 Vac (450 - 800 Vdc) |
Frequency range | 47 Hz - 63 Hz (0 Hz) |
Nominal input current (nominal load) | 1,21 A (400 Vac) / 1,03 A (500 Vac) |
Inrush current limitation | < 30 A, NTC |
Turn-on time after applying the main voltage | 0,5 s (400 Vac) |
Mains buffering (full load) | 15 (400 Vac) / 25 ms (500 Vac) |
Recommended power circuit breaker | 6 A, 10 A, 16 A (B-, C-Charakteristik / -characteristic) |
Transient surge voltage protection | Varistor / varistor |
Terminals | Push-In; max. 2,5 mm2 |
Output | |
Nominal output voltage | 24 Vdc ± 1 % |
Output voltage range | 23 ... 28,5 Vdc |
Nominal output current | 20 A |
Output current limitation; constant current | typ. 22 A |
Parallel operation | Js |
Serial operation | Ja |
Power losses (Stand-by / nominal load) | 5,8 W / 42,8 W (400 Vac) |
Maximum power losses | 47,6 W (500 Vac / 24 V / 20 A) |
Efficiency | typ. 92 % |
Ripple/noise | typ. 15 mVss |
Resistance to reverse feed max. (nominal load) | max. 35 Vdc |
Protection against internal surge voltage (OVP) | max. 40 Vdc |
Terminals | Push-In; max. 6 mm2 |
Signaling | |
Signaling “DC OK“, LED green lit permanently | Uout > 21,5 V |
Signal contact “DC OK“ Relay, contact closed | Uout > 21,5 V max. 30 V; 1 A |
Terminals | Push-In; max. 2,5 mm2 |
Environment | |
Storage temperature | -25 °C ... +85 °C |
Operational temperature | -25 °C ... +70 °C; Anlauf bei / start at -40 °C |
(Convection cooling) | typgeprüft / type-tested |
Derating | -2,5 % / K > +55 °C |
Humidity | 5 ... 96 %; keine Betauung / no condensation |
Required minimum spacing (left / right) | - |
Required minimum spacing (over / under) | 50 mm |
General data | |
Degree of protection acc. to IEC 60529 | IP 20 |
Protection class acc. to EN 61140 | I |
Overvoltage category | III |
Altitude during operation | 0 ... 3000 m |
For installation in Pollution Degree environment | 2 |
Use Copper Conductors only, rated | min. 75 °C |
Standards | |
Safety | EN 61558-2-16, EN 60950-1 |
EMC | EN 61204-3 |
Safety extra-low voltage (SELV / PELV) | IEC 60364-4-41 (DIN VDE 0100-410) |
CE acc. to | 2014/35/EU, 2014/30/EU, 2011/65/EU |
Mechanical data | |
Mounting on standard rail | DIN EN / IEC 60715 - TS35 |
Weight | 1,5 kg |
Dimensions (W x H x D; D incl. DIN 35-7.5 rail) | 80 x 127 x 160 mm |
KONZEPT模塊BEK系列介紹
BEK系列設備專為工業應用而設計,可提供24 VDC 10 A / 20 A單相/三相。
除了高效(通常為90%10 A / 92%20 A)和緊湊的結構系列之外,BEK還符合嚴格的安全性和EMC要求。
每個BEK均具有開路,短路和過載保護,并且具有較高的工作溫度(-25°C…70°C)。 BEK具有廣泛的輸入和推入式端子,可提供更好的服務和安裝便利性,是一種全方位電源。
Devices from series BEK are designed for industrial applications and available with 24 VDC 10 A / 20 A as single phase/ three phase.
In addition to high effiency (typically 90 % 10 A/92 % 20 A) and a compact construction series BEK complies with exacting safety and EMC requirements.
Every BEK is open circuit-, short circuit and overload protected and has a large operational temperature(-25 °C… 70 °C). With a wide range input and push in terminals for more service and installation friendliness BEK is an allround power supply.
KONZEPT模塊BEK系列其他常用型號:
KONZEPT BEK 2410-1
KONZEPT BEK 2410-3
KONZEPT BEK 2420-3
KONZEPT Module NEW + ORIGINAL+ ONE YEAR WARRANTY
愛澤工業成立于2010年,定位于向先進制造工業提供高端制造技術和設備。代理經營世界先進的電氣自動化、機械與傳動、流體控制、儀器儀表、工具等產品。作為電氣,液壓以及氣動解決方案的合作伙伴,我們利用我們的全球協作團隊,為客戶提供先進解決方案,市場知識以及相關增值服務來幫助優化客戶的工作效率,提高可靠性和安全性,致力于成為工業產品和解決方案的優質渠道。
如果有任何關于KONZEPT模塊BEK2420-3的疑問,請隨時與我們電聯,(021-3100 6702),我們將盡全力解決您的問題。
If you have any question for KONZEPT products, please feel free to dial 0086-21-3100 6702/ send request email to sales@ize-industries.com / browse our website: jjxdch.cn.
KONZEPT模塊BEK2420-3介紹及參數