HELM INSTRUMENT成立于1962年，是過程控制系統，力傳感器和金屬成型行業軟件的設計和制造商。
主營產品：
HELM INSTRUMENT差壓傳感器
HELM INSTRUMENT壓力傳感器
HELM INSTRUMENT液位傳感器
HELM INSTRUMENT壓力變送器
HELM INSTRUMENT稱重傳感器
HELM INSTRUMENT應變傳感器
HELM INSTRUMENT監測儀RLG-4產品參數
Electrical Specifications: | |
Current Consumpttion | 500mA @ 24VDC |
Number of channels | (2) RLG-2DC, (4) RLG4DC |
ND Conversion Method | Successive Approximation - 12 Bit |
Normal Mode Rejection(between + and - input) | 50 db @ gain 2000 |
Amp Roll-Off Frequency | 650 Hz @ gain 3000 |
Calibration | Manual Calibration |
Isolation | 500 VDC continuous between inputs and chassis ground |
Environmental Specifications: | |
Operating Temperature | 0℃ to 60℃ (32℉ to 140℉) |
Hazardous Environment Classification | Class 1, Division 2 Hazardous Environment |
Input Specifications: | |
Type of Input | Strain Gage (350 Ohm, 700 Ohm) |
Input Impedance | 1K Ohm |
Low Range Gain, with Cal Resistor 140K Ohm | Maximum Gain 1176；Minimum Gain 54 |
High Range Gain, with Cal Resistor 1 Meg Ohm | Maximum Gain 6959；Minimum Gain 347 |
Display Resolution | up to 0.1% of Full Scale |
Overall Unit Accuracy | Within 1% of Full Scale |
A/D Sample Rate | 100 Microseconds |
Output Specifications: | |
Alarm Relay | (2) Solid State Relays,(.5A @ 24VDC) |
HELM INSTRUMENT監測儀RLG-4產品介紹
HELM型號RLG-2（2通道）和RLG-4（4通道）LOADGARD監視器提供壓機過載保護，模具保護，并改善了零件質量，而使操作員的介入降至最低。 RLG-2型單元允許兩（2）個力傳感器輸入，通常用于OBI或間隙框架壓力機，壓力機框架兩側均帶有Helm螺栓固定應變增益?zhèn)鞲衅鳌?RLG-4型單元可輸入四（4）個力傳感器，通常用于直邊壓力機，在四個壓力機列的每一個上均配有Helm螺栓固定應變增益?zhèn)鞲衅鳌?/p>
前面板上的數字儀表用于顯示更新的峰值負載值和高/低警報設置。對于24 VDC單元，通過兩（2）個報警繼電器（一個用于容量報警，一個用于趨勢報警）啟動機器停機。對于110/220 VAC單元，機器停止通過一個警報繼電器啟動，當超過任何警報極限（容量或趨勢警報）時，警報繼電器將觸發。
The HELM Model RLG-2 (2 Channel) and RLG-4 (4 channel) LOADGARD monitors provide press overload protection, die protection, and improved part quality, with minimal operator involvement. The Model RLG-2 unit allows for two (2) force sensor inputs, and is typically used on OBI or gap-frame presses, with a Helm bolt-on Strain Gain sensor on each side of the press frame. The Model RLG-4 unit allows for four (4) force sensor inputs, and is typically used on straightside presses, with a Helm bolt-on Strain Gain sensor on each of the four press columns.
Digital meters on the front panel are used to display updated Peak load values and high/low alarm settings. For the 24 VDC unit, machine stop is initiated by means of two (2) alarm relays (one for CAPACITY ALARMS and one for TREND ALARMS). For the 110/220 VAC unit,machine stop is initiated by means of one alarm relay, which fires when any alarm limit (CAPACITY or TREND ALARM) is exceeded.
外觀尺寸
HELM INSTRUMENT監測儀RLG系列其他常見型號：
HELM INSTRUMENT RLG-2
HELM INSTRUMENT RLG-4
HELM INSTRUMENT monitors NEW + ORIGINAL+ ONE YEAR WARRANTY
愛澤工業成立于2010年，定位于向先進制造工業提供高端制造技術和設備。代理經營世界先進的電氣自動化、機械與傳動、流體控制、儀器儀表、工具等產品。作為電氣，液壓以及氣動解決方案的合作伙伴，我們利用我們的全球協作團隊，為客戶提供先進解決方案，市場知識以及相關增值服務來幫助優化客戶的工作效率，提高可靠性和安全性，致力于成為工業產品和解決方案的優質渠道。
如果有任何關于HELM INSTRUMENT監測儀RLG-4的疑問，請隨時與我們溝通（021-31006702）。我們將盡全力解決您的問題。
If you have any question for HELM INSTRUMENT products, please feel free to dial 0086-21-3100 6702/ send request email to sales@ize-industries.com / browse our website:jjxdch.cn.
HELM INSTRUMENT監測儀RLG-4產品參數
