HYDAC充氮裝置FPU系列介紹
HYDAC充氮工具FPU-1-350250F2.5G11A3K 愛澤工業 izeindustries
HYDAC充氮裝置FPU系列介紹
HYDAC充電和測試單元FPU用于為液壓蓄能器充氮或檢查或更改蓄能器中現有的預充壓力。
為此，將充電和測試單元擰到液壓蓄能器的氣閥上，并通過帶減壓器的柔性軟管連接到氮?dú)馄俊?/p>
需要適配器A3對HYDAC膀胱蓄能器進行充電和測試（包括在供貨范圍內）。
HYDAC氮?dú)獬錃庋b置可以快速，廉價地充氣或測試氣囊，活塞和隔膜蓄能器中所需的氣體預充氣壓力。它們保證了標準商業氮?dú)馄康淖罴牙茫罡邭堄鄩毫?0 bar，最大預充氣壓力為350 bar。提供便攜式，移動式和固定式N2-Server版本。
可根據要求提供更高的預充壓力，最高可達500 bar。
The HYDAC charging and testing unit FPU is used to charge hydraulic accumulators with nitrogen or to check or to change the existing pre-charge pressure in accumulators.
For this purpose the charging and testing unit is screwed onto the gas valve of the hydraulic accumulator and connected to a nitrogen bottle via a flexible hose with a pressure reducer.
Adapter A3 is needed to charge and test the HYDAC bladder accumulator (included in scope of delivery).
HYDAC nitrogen charging units make it possible to rapidly and inexpensively charge and/or test the required gas pre-charge pressures in bladder, piston and diaphragm accumulators. They guarantee an optimal utilisation of standard commercial nitrogen bottles up to a residual pressure of 20 bar and a maximum pre-charge pressure of 350 bar.Portable, mobile and stationary N2-Server versions are available.
Higher pre-charge pressures up to 500 bar available on request.
HYDAC充氮裝置FPU系列選型參考
愛澤工業專業提供HYDAC全系列產品：
HYDAC FPU-1-350/250F2,5G2A3K
HYDAC FPU-1-350/250F2,5G3A3K
HYDAC FPU-1-350/250F2,5G4A3K
HYDAC FPU-1-350/250F2,5G5A3K
HYDAC FPU-1-350/250F2,5G6A3K
HYDAC FPU-1-350/250F2,5G7A3K
HYDAC FPU-1-350/250F2,5G8A3K
HYDAC FPU-1-350/250F2,5G9A3K
HYDAC FPU-1-350/250F2,5G10A3K
HYDAC FPU-1-350/250F2,5G11A3K
HYDAC FPU-1-350/250F2,5G12A3K
HYDAC FPU-1-350/250F2,5G13A3K
HYDAC FPU-1-350/010F2.5A3K
HYDAC FPU-1-350/010F4A3K
HYDAC FPU-1-350/025F2.5A3K
HYDAC FPU-1-350/025F4A3K
HYDAC FPU-1-350/100F2.5A3K
HYDAC FPU-1-350/100F4A3K
HYDAC FPU-1-350/250F2.5A3K
HYDAC FPU-1-350/250F4A3K
HYDAC FPU-1-350/400F2.5A3K
HYDAC FPU-1-350/400F4A3K
HYDAC FPU-1-350/010F2.5A3
HYDAC FPU-1-350/010F4A3
HYDAC FPU-1-350/025F2.5A3
HYDAC FPU-1-350/025F4A3
HYDAC FPU-1-350/100F2.5A3
HYDAC FPU-1-350/100F4A3
HYDAC FPU-1-350/250F2.5A3
HYDAC FPU-1-350/250F4A3
HYDAC FPU-1-350/400F2.5A3
HYDAC FPU-1-350/400F4A3
如果您有任何關于HYDAC的相關技術咨詢或者需要產品的相關技術資料與文檔，請隨時致電愛澤工業（021-3100 6702），或者訪問網站jjxdch.cn,我們將盡全力解決您的問題。
If you have any question for HYDAC，please feel free to dial 0086-21-3100 6702 or browse our website: jjxdch.cn.
IZE-industries
Contact Information：
Tel：0086-21-31006702 or 0086-21-35350722
Fax：0086-21-35350711
Mobile：0086-189 1750 1433
E-mail：sales@ize-industries.com
Website：jjxdch.cn
