DESCO成立于1956年，產品主要在美國生產制造，核心產品是為電子制造領域的ESD控制而制造的。
DESCO產品有：
地板涂飾和保養
地板墊
泡沫
電離
測量
罩衫和手套
膠帶
連續監控器
工作臺墊
腕帶和線圈線
DESCO電離測試套件19493選型介紹
Specifications | |
Performance | |
Measurement Range (switch selectable) | |
Low Range | 0 to ±2kV / inch |
High Range | 0 to ±20 kV / inch |
Measurement Accuracy | |
Voltage Monitor Output | Better than ±5% of reading, 10mV |
Voltage Display | Better than ±5% of reading, ±2 counts |
Measurement Stability | ±10 counts |
Voltage Monitor | |
Output | 2 volts output at full scale |
Ratio | |
Low Range | 1/1000 of the measured electrostatic field |
High Range | 1/10000 of the measured electrostatic field |
Front Panel Meter | |
Voltage Display | 3-1/2 digit LED display |
Range | |
Low | 0 to ±1.999 kV / inch |
High | 0 to ±19.99 kV / inch |
Display Resolution | |
Low Range | 1 V / inch |
High Range | 10 V / inch |
Sampling Rate | 3 readings per second |
Features | |
Automatic Shutof | Unit will shut off after 20 minutes from last activity |
Ranging System | LED distance indicator; aligned targets indicate one (1) inch |
Range / Zero Switch | LED distance indicator. Resets the instrument to zero and selects the measurement range. |
Low Battery Indicator | An LCD display message indicates when the battery is low |
Hold Switch | Retains the LCD display reading when depressed |
General | |
Dimensions | 0.9" H x 2.8" W x 4.9"L (24 mm x 70 mm x 126 mm) |
Weight | 4.9 oz. (140 g) with battery |
Voltage Monitor | 2.5 mm jack (3/32") |
Connection | monophone |
Tip | Signal |
Sleeve | Ground |
Operating Conditions | |
Temperature | 50 to 86oF (10 to 30oC) |
Relative Humidity | To 80%, non-condensing |
Altitude | To 2000 m |
Certifications | CE |
DESCO電離測試套件19493產品介紹
便攜式套件，用于測試靜電場以及空氣電離器的偏移電壓和放電時間
在1英寸的距離內測量高達±19.99 kV的物體的表面電壓和極性。
靜電場儀用不銹鋼導電板
用于測量偏移電壓和放電時間，以便根據ANSI / ESD SP3.3和ESD TR53定期驗證離子發生器。
±1000伏特充電器
給導電板加電荷以測量放電時間。
帶有薄膜開關的耐用外殼設計（新）
保護儀表不受物理損壞并最大程度地減少磨損。
LED測距儀
紅色測距燈可幫助操作員將儀表放置在距被測物體正確距離的位置
按住按鈕
允許保留測量值以便于閱讀
電離測試套件將導電板隔離開，并將其放置在距數字靜電場儀末端1英寸的位置。 然后，由電池供電的充電器可讓人們快速將+/- 1,000伏特的電荷放置在板上，由于被隔離，它將在此處保留一段時間。 根據ESD-SP3.3進行的空氣電離器的定期驗證測試是將套件放在電離器的氣流中，并使用秒表測量放電時間，以將1,000伏電荷減少到100伏，并將-1,000伏減少 到-100伏 套件接地后，即可估算出失調電壓（平衡）。
Portable Kit for Testing of Electrostatic Fields, and Offset Voltage and Discharge Times of Air Ionizers
Measures surface voltage and polarity on objects up to ±19.99 kV at a distance of 1 inch.
Stainless Steel Conductive Plate for Static Field Meter
Used to measure offset voltage and discharge times for the periodic verification of ionizers per ANSI/ESD SP3.3 and ESD TR53.
±1000 Volt Charger
Apply charge to conductive plate to measure discharge times.
Durable Housing Design with Membrane Switches (NEW)
Protects meter from physical damage and minimizes wear.
LED Range Finder
Red ranging lights help operator to place the meter at the correct distance from the object being measured
Hold Button
Allows the measurements to be retained for easy reading
The Ionization Test Kit isolates the conductive Plate and positions it 1” away from the end of the Digital Static Field Meter. The battery operated Charger then allows one to quickly place a +/-1,000 volt charge on the Plate which since it is isolated will remain there for some time. The Periodic Verification of Air Ionizers test in accordance with ESD-SP3.3 is to place the Kit in the Ionizer’s airflow and use a stopwatch to measure the discharge times to reduce a 1,000 volt charge to 100 volts and to reduce a -1,000 volt charge to -100 volts. With the Kit grounded, it can then approximate offset voltage (balance).
DESCO電離測試套件19493其他型號列舉：
DESCO 19640
DESCO 19784
DESCO 19249
DESCO 19290
DESCO 19790
DESCO 19297
DESCO 19431
DESCO 19298
DESCO 19291
DESCO 19786
DESCO 19492
DESCO 19493
DESCO 19641
DESCO 19292
DESCO 19297
DESCO 19298
DESCO 19440
DESCO 19441
DESCO 19298
DESCO 19293
DESCO Main signal module NEW + ORIGINAL+ ONE YEAR WARRANTY
愛澤工業成立于2010年，定位于向先進制造工業提供高端制造技術和設備。代理經營世界先進的電氣自動化、機械與傳動、流體控制、儀器儀表、工具等產品。作為電氣，液壓以及氣動解決方案的合作伙伴，我們利用我們的全球協作團隊，為客戶提供先進解決方案，市場知識以及相關增值服務來幫助優化客戶的工作效率，提高可靠性和安全性，致力于成為工業產品和解決方案的優質渠道。
如果有任何關于DESCO電離測試套件19493的疑問，請隨時與我們電聯，（021-3100 6702），我們將盡全力解決您的問題。
If you have any question for DESCO products, please feel free to dial 0086-21-3100 6702/ send request email to sales@ize-industries.com / browse our website: jjxdch.cn.
DESCO電離測試套件19493產品介紹
