FW MURPHY為油氣生產和天然氣壓縮市場提供廣泛的儀表和控制解決方案。自75年前成立以來，主營產品有控制器，面板系統及配件，量規，液位設備和感測器等。
FW MURPHY壓力表45APE系列技術參數
Dial: | White on black, dual scale, psi and kPa standard, 4-1/2 in. (114 mm) diameter |
Case: | Die cast aluminum, surface or panel mount |
Overrange: | Do not exceed 10% FS above full range |
Process Connection: | 1/4 NPTM thru 1000 psi; 1/2 NPTM 1,500 - 5,000 psi; back connection optional |
Sensing Element: | Bronze or 316 stainless steel bourdon tube |
Gage Accuracy: | Indicating pointer within switch points with hysteresis of <1%: |
45APE/45APEF Series Accuracy Outside Switch Points (accuracy above or below trip point) | |
PSI Range | Accuracy |
< 100 | 10 |
100-300 | 4 |
400-1500 | 2 |
2000 | 12 |
3000-5000 | 8 |
Reading based on testing performed with switch point at mid scale which represents worst case. | |
Pressure Relief Disc: | Back of case (except EX models) |
Switch Reset Deadband: Approximately 10% FS | |
Switch Point Accuracy: | ±1.5% |
Snap-Acting Switches: | 2-SPDT; 2 A @ 250 VAC |
Wire Connections (Surface Mount): | 1/2 NPTF conduit entry with terminal block |
Wire Connections (Panel Mount): | Wire leads, 18 AWG (1.0 mm2) x 9 in. (229 mm) long |
Weight: | 5 lbs 6 oz (2.4 kg) approximately |
Explosion-proof models: | 21 lb. (9.5 kg) approx. |
Dimensions: | 10 x 9 x 6 in. (254 x 229 x 152 mm) approximately |
Explosion-proof models: | 12 x 12 x 9 in (305 x 305 x 229 mm) approximately |
CSA Certified Models: | Explosion-proof EX models with pressure range thru 5000 psig (34.4 MPa) [344 bar] are CSA approved for Hazardous locations Class I, Groups, C & D. |
FW MURPHY壓力表45APE系列介紹
45APE 系列表壓儀表是一種用于壓力指示的機械表壓計。它包括兩個可調 SPDT 開關。這些微動開關可用于啟動和停止、觸發警報和關閉設備。范圍從 30 psi (207 kPa) [2.06 bar] 到 5,000 psi (34.48 MPa) [344.73 bar]。
45APE 系列采用帶不銹鋼雙扇形齒輪運動的波登管傳感裝置。當對布爾登管施加壓力時，每個扇區都會驅動單獨的指針。指示指針（可見指針）顯示實際壓力讀數，包括低于和高于低和高觸發點。低和高觸發點可在量規前透鏡上獨立調節。開關操作指針（在刻度盤后面）被校準以跟隨指示指針。低和高跳閘點指示器停止開關操作指針。當壓力通過空轉原理減小或增大時，相應的速動開關將跳閘。
45APE 系列型號廣泛用于需要壓力指示和 Form C 低壓和高壓開關的應用。
? 帶獨立低速和高速微動開關的組合指示表
? 現場可調且高度可見的低壓和高壓跳變點指示器
? 雙扇形齒輪運動允許全量程指示和設定點控制
? 提供面板和表面貼裝版本
? 提供鎖存控制繼電器版本
The 45APE Series gage instrument is a mechanical gage for pressure indication. It includes two adjustable SPDT switches. These snap-acting switches can be used for start and stop, to trip alarms and to shut down equipment. Ranges are available from 30 psi (207 kPa) [2.06 bar] thru 5,000 psi (34.48 MPa) [344.73 bar].
The 45APE Series utilizes a bourdon tube sensing unit with a stainless steel dual-sector geared movement. Each of the sectors drives separate pointers when pressure is applied to the bourdon tube. The indicating pointer (visible pointer) shows actual pressure reading, including below and beyond the low and high trip points. The low and high trip points are adjustable independently on the gage front lens. The switch operator pointer (behind the dial) is calibrated to follow the indicating pointer. The low and high trip point indicators arrest the switch operator pointer. As pressure decreases or increases through the principal of lost motion, the respective snapswitch is tripped.
The 45APE Series models are widely used in applications requiring pressure indication and Form C low and high pressure switches.
? Combination Indicating Gage with Independent Low and High Snap-Acting Switches
? Field-Adjustable and Highly Visible Low and High Pressure Trip Point Indicators
? Dual-Sector Geared Movement Allows for Full-Scale Indication and Set Point Control
? Panel and Surface Mount Versions Available
? Latching Control Relay Versions Available
FW MURPHY壓力表45APE系列選型
FW MURPHY壓力表45APE系列其他常用型號：
FW MURPHY 45APE-S-30V100
FW MURPHY 45APE-S-100-EX
FW MURPHY 45APE-S-30
FW MURPHY 45APE-S-60
FW MURPHY 45APE-S-100
FW MURPHY 45APE-S-200
FW MURPHY 45APE-S-300
FW MURPHY 45APE-S-400
FW MURPHY 45APE-S-600
FW MURPHY 45APE-S-1000
FW MURPHY 45APE-S-1500
FW MURPHY 45APE-S-2000
FW MURPHY 45APE-S-3000
FW MURPHY 45APE-S-5000
FW MURPHY Pressure Gage NEW + ORIGINAL+ ONE YEAR WARRANTY
愛澤工業成立于2010年，定位于向制造工業提供高端制造技術和設備。代理經營世界優質的電氣自動化、機械與傳動、流體控制、儀器儀表、工具等產品。作為電氣，液壓以及氣動解決方案的合作伙伴，我們利用我們的全球協作團隊，為客戶提供先進解決方案，市場知識以及相關增值服務來幫助優化客戶的工作效率，提高可靠性和安全性，致力于成為工業產品和解決方案的優質渠道。
如果有任何關于FW MURPHY壓力表45APE-S-100的疑問，請隨時與我們溝通（021-31006702）。我們將盡全力解決您的問題。
If you have any question for FW MURPHY products, please feel free to dial 0086-21-3100 6702/ send request email to sales@ize-industries.com / browse our website:jjxdch.cn.
