J.SCHNEIDER自成立75年以來，憑借創新和成長已成為全球市場上優質的電源供應商之一。
J.SCHNEIDER的主營產品有變壓器，反應器，電抗器，電源和轉換器等。
J-SCHNEIDER電源C-TEC 2403-1技術參數
Technical Data | |
Input | |
Nominal input voltageg | 24 V DC -1,2 % / +15 % (SELV/PELV) |
Input voltage range | 23,7…27,6 V DC ± 0 % |
Min. charging voltage | 23,7 V DC |
Nominal input current | 3 A |
Output | |
Output voltage in back-up operation | 23,0 V DC ±2 % |
Nominal output current | 3 A |
Energy (typical) | 1,5 kJ @ (Ua = 22,8 V DC, Ia = 0,6 A) |
Max power loss ?worst-case‘ | 7 W |
efficiency | 93,9% @ (Ue=24,0 V DC; Ua=23 V DC;Ia = 3 A) |
Fusing | |
Internal device protection (interal) | 4 A (T) |
Fusing DC-output circuit (external) | 3 A (T) |
General | |
Protective system | IP20 |
Operational temperature | -40 °C … 60 °C |
Storage temperature | -40 °C … 60 °C |
Rel. humidity | ≤95% no condensation |
Max. mounting height (without load reduction) | 2000 m |
Dimensions (HxWxD) | 92,5 mm x 60 mm x 116 mm |
weight | 0,6 kg |
J-SCHNEIDER電源C-TEC 2403-1產品介紹
C-TEC 系列的 DC-UPS 包括超級電容器作為外殼內的能量存儲。 該電容器在正常運行期間由系統電壓 (Ue) 充電。 連接的負載也由系統電壓供電。 在系統電壓中斷的情況下，超級電容器的能量以調節的方式釋放。 對于 dc dc 轉換器，負載由電容器供電，直到其放電。 后備時間取決于電容器的充電狀態和放電電流。
? 長壽命超級電容器免維護
? 基于微控制器的超級電容器充電和放電
? 使用無電位觸點和 LED 控制操作和充電狀態
? 可通過外部電容器擴展模塊進行容量擴展
The DC-UPS of the series C-TEC includes ultra-capacitors as energy storage inside the housing. This capacitor is charged with the system voltage (Ue) during normal operation. The connected loads are supplied as well from the system voltage. In case of an interruption of the system voltage the energy of the ultra-capacitors is released in a regulated way. With a dc dc converter, the load is supplied by the capacitor until it is discharged. The back-up time depends on the state of charge of the capacitors and on the discharge current.
? Maintenance-free because of long-life ultra-capacitors
? Microcontroller based charging and discharging of the ultra-capacitors
? Control of operation and status of charge with potential-free contacts and LED
? Capacity extension possible with external capacitor extension modules
J-SCHNEIDER電源C-TEC系列其他常用型號：
J-SCHNEIDER C-TEC 2403
J-SCHNEIDER C-TEC 2403 USB
J-SCHNEIDER C-TEC 2403-05
J-SCHNEIDER C-TEC 2403-1
J-SCHNEIDER Power supply NEW + ORIGINAL+ ONE YEAR WARRANTY
愛澤工業成立于2010年，定位于向制造工業提供高端制造技術和設備。代理經營世界優質的電氣自動化、機械與傳動、流體控制、儀器儀表、工具等產品。作為電氣，液壓以及氣動解決方案的合作伙伴，我們利用我們的全球協作團隊，為客戶提供先進解決方案，市場知識以及相關增值服務來幫助優化客戶的工作效率，提高可靠性和安全性，致力于成為工業產品和解決方案的優質渠道。
如果有任何關于J-SCHNEIDER電源C-TEC 2403-1的疑問，請隨時與我們溝通（021-31006702）。我們將盡全力解決您的問題。
If you have any question for J-SCHNEIDER products, please feel free to dial 0086-21-3100 6702/ send request email to sales@ize-industries.com / browse our website:jjxdch.cn.
J-SCHNEIDER電源C-TEC 2403-1技術參數介紹
