STAEDTLER工業提供各類造型粘土，產品均產自德國。
STAEDTLER粘土8432M產品參數
Composition: | waxes, oil, fillers, pigments |
Density: | approx. 1,5 g/cm, de-aired |
Color: | brown |
Odor: | neutral |
α(Linear Shrinkage Coefficient) | constant 2,1 X 10~4K-1 (0- 20°C132- 68°F) |
Shelf life: | at least 24 months at temperatures from 0°C32°F to 30°C/86°F |
Working temperature: | 55°C/131°F- 60°C/140°F |
Degree of hardness: | medium |
Shore hardness A | 62 (20°C/68°F) |
STAEDTLER-hardness AH/ g: | 23°C/73, 4°F: 4.500 40°C/1 04°F: 800 60°C/140°F: 250 |
Solubility: | insoluble in water, partially soluble in organic solvent |
Toxicology; | Marsclay Medium is toxicologically harmless, certified by ACMI, USA. |
STAEDTLER粘土8432M產品介紹
Instruction of use:
As a permanently malleable compoundMarsclay Medium remains pliable and can be used again and again.
When heated to 55°C/131°F- 60°C/140°F, the clay becomes soft and pliable.
The heating period is about 5 hours (depending on type and loading of oven).
At room-temperature up to 25°C/77°F the models keep their contours and edges.
By hot conditions or direct solar radiation softening of the surface occurs.
Wood, polystyrene and hard foams can be used as base materials.
Base materials and the warm modelling clay bond without the need of adhesives.
Grave quantities should be applied in layers.
By applying of bigger masses, commend to warm up the base layer for an optimum bond.
Once the top surface has cooled down, the model can be shaped by hand or milling machines.
Modifications can be made to the finished model simply and dust free.
Due to the special bonding qualities small amounts of material can be applied.
In case of serious changes, the roughening of the previous surface is recommended.
Finishes with modelling film Can be removed quickly and easily.
When using a heat-gun do not exceed temperatures above 60°C/140°F.
The clay-model can be casted with gypsum or silicone. As releasing agent shellac can be used.
The clay can be lacquered withClayPeel.
Soiled surfaces can be cleaned with solvent cleaner.
使用說明：
作為一種具有永久延展性的化合物，Marsclay培養基保持柔韌，可以反復使用。
當加熱到55°C/131°F- 60°C/140°F時，粘土變得柔軟而柔韌。
加熱時間約為5小時（取決于烤箱的類型和負載）。
在高達 25°C/77°F 的室溫下，模型保持其輪廓和邊緣。
通過炎熱的條件或直接的太陽輻射，表面會發生軟化。
木材、聚苯乙烯和硬質泡沫可用作基材。
基材和溫暖的造型粘土無需粘合劑即可粘合。
嚴重?cái)?shù)量應分層應用。
通過應用更大的質量，建議預熱基層以獲得最佳粘合。
一旦頂面冷卻下來，模型就可以用手工或銑床成型。
可以對成品模型進行簡單且無塵的修改。
由于特殊的粘合質量，可以使用少量材料。
如果發生嚴重變化，建議對之前的表面進行粗化處理。
帶造型膜的飾面 可以快速輕松地去除。
使用熱風槍時，溫度不要超過60°C/140°F。
粘土模型可以用石膏或硅樹脂澆鑄?？梢允褂米夏z作為脫模劑。
粘土可以用ClayPeel上漆。
臟污的表面可以用溶劑清潔劑清洗。
STAEDTLER粘土其他常見型號：
STAEDTLER 8432M
STAEDTLER 8432MC
STAEDTLER 8432L
STAEDTLER 8432LC
STAEDTLER sludge NEW + ORIGINAL+ ONE YEAR WARRANTY
愛澤工業成立于2010年，定位于向先進制造工業提供高端制造技術和設備。代理經營世界先進的電氣自動化、機械與傳動、流體控制、儀器儀表、工具等產品。作為電氣，液壓以及氣動解決方案的合作伙伴，我們利用我們的全球協作團隊，為客戶提供先進解決方案，市場知識以及相關增值服務來幫助優化客戶的工作效率，提高可靠性和安全性，致力于成為工業產品和解決方案的優質渠道。
如果有任何關于STAEDTLER粘土8432M的疑問，請隨時與我們溝通（021-31006702）。我們將盡全力解決您的問題。
If you have any question for STAEDTLER products, please feel free to dial 0086-21-3100 6702/ send request email to sales@ize-industries.com / browse our website:jjxdch.cn.
STAEDTLER粘土8432M產品參數
