燃燒器由哪些部件組成？（中英文）
主要結構
Main Structure
該組件構成了燃燒器的主要框架和輪廓。它有一個外殼和附屬部件，并且用于功能系統的附加部件安裝在主要結構上。
This component makes up the burner’s primary framework and outline. It has a housing and accompanying components, and additional items for a functioning system are mounted on the primary structure.
控制系統
Control System
該產品的該組件由壓力或溫度開關、火焰監測器、控制器、伺服機構（電機、液壓缸）等組成。
This component of the product consists of switches for pressure or temperature, monitors for flames, controllers, servo mechanisms (motors, hydraulic cylinders), etc.
燃燒器控制單元：
Burner Control unit:
燃燒器控制的核心部件，類似于燃燒器的大腦，負責收集和觸發每個動作的信號。這包括稱為比例調節器的過程管理控制器、負責檢測閥門泄漏的氣體泄漏檢測器等。
控制系統是任何帶有機械驅動器的電動伺服電機和液壓缸。原因是前者與程序控制器構成閉環控制系統，而后者由油泵提供動力，控制器實際觸發指令執行，控制風門的開閉。
The central component of burner control, which is similar to the burner’s brain, is responsible for gathering and triggering the signals of each action. This includes the process management controller known as the proportional regulator, the gas leak detector responsible for detecting valve leaks, etc.
Control systems are any electric servo motors and hydraulic cylinders with mechanical drives. The reason is because the former and the programme controller constitute a closed-loop control system, but the latter is powered by the oil pump and the controller actually triggers the instructions for its execution, which controls the opening and shutting of the damper.
火焰監測儀：
Flame monitor:
該名稱越來越被誤解為行業內的通用名稱，僅通過控制器類別中的火焰信號來調節開閉，偏離了真正的功能名稱；可以觀察到實際的火焰。用于檢測火焰離子的光敏電阻、光電管、離子探針，如果具有獨立開關電源的能力，都應該稱為控制器。
This name is becoming more misunderstood as the common name in the industry, which only regulates the opening and closing by the flame signal in the controller category, deviates from the real function name; the actual flame may be observed. The photoresistor, photoelectric tube, and ion probe used to detect flame ions should all be referred to be controllers if they have the ability to independently switch on and off the power.
壓力和溫度開關：
Pressure and temperature switch:
它應該被稱為廣泛意義上的壓力或溫度傳感器。其中燃?xì)忾_關和氣壓開關分別用于調節燃?xì)夂蜌鈮海ㄈ绻麤]有強制供氣而產生氣壓則關閉整機電源）。大多數時候，溫度開關用于調節高粘度燃料（例如重油或渣油）的加熱溫度。
It should be referred to as a pressure or temperature sensor in the broadest sense. Among them, the gas switch and the air pressure switch are used to regulate the gas and the air pressure, respectively (if there is no forced air supply and the air pressure is created, the power of the entire machine is switched off). The majority of the time, temperature switches are used to regulate the heating temperature of fuels with high viscosities, such heavy oil or residual oil.
點火系統：
Ignition System:
高壓電纜、點火電極和點火變壓器均包含在該產品的該組件中。用于產生高壓電流并通過電極尖端放電以點燃燃燒器的部件是點火變壓器和電極。
High-voltage cables, ignition electrodes, and ignition transformers are all included in this component of the product. An item used to produce high-voltage current and discharge it via the electrode tip to light the burner is an ignition transformer and electrode.
動力總成：
Powertrain:
在標準燃燒器中，需要連接到電源的部件是電動機。
In standard burners, the only component that need be connected to the power supply is the electric motor.
燃油供應系統：
Fuel Supply System:
在燃燒器上，這是較難理解的系統之一。事實上，該系統的機械部件比控制系統的電氣部件復雜得多。燃油泵、燃油噴嘴、燃油加熱器、燃油杯、燃油管、燃油電磁閥、燃?xì)忾y（包括燃?xì)怆姶砰y）、燃?xì)鈮毫φ{(diào)節器、燃?xì)膺^濾器。
On the burner, this is one of the systems that is more difficult to understand. In point of fact, the mechanical components that are a part of this system are far more complex than the electrical components that are a part of the control system. Fuel pump, fuel nozzle, fuel heater, fuel cup, fuel pipe, fuel solenoid valve, gas valve (including gas solenoid valve), gas pressure regulator, gas filter.
燃燒系統組件：
Combustion system components:
技術更先進的系統的行業標準。事實上，無論負責控制的電氣產品有多先進，或者油泵有多先進，都一樣。這些技術和方法的水平與燃燒器制造商的能力無關；相反，燃燒系統的設計要求它們是自力更生的。因此，燃燒器的性能取決于燃燒系統的水平。燃燒罐、鼓風機葉輪、火焰板、油炮、氣芯管、內置或外置擴散器均是該產品的組成部分。該產品的該部件構成了空氣和燃料預混合的裝置。
The industry standard for the most technically advanced system. In point of fact, it does not matter how advanced the electrical products are that are responsible for the control or how advanced the oil pump is; the level of these technologies and methods has nothing to do with the capabilities of the burner manufacturer; rather, the design of the combustion system requires that they be self-reliant. of. Because of this, the capability of a burner is determined by the level of the combustion system. Combustion canister, impeller for forced air blower, flame plate, oil cannon, gas core tube and built-in or external diffuser are all components of this component of the product. A device for pre-mixing air and fuel is constituted by this component of the product.
聲明：
- 文章轉載自Mordor Intelligence，由愛澤工業翻譯，如有侵權，請聯系刪除！
- 如有偏頗，歡迎指正！
